Fisher And Paykel Two Drawer Dishwasher Not Draining

Asked by: Yolande Keeling

asked in category: General Last Updated: 11th May, 2020

Why is my Dishdrawer not draining?

Straighten the hose and look through it. If you can see obstructions, the drain hose is likely the cause of your drainage problems. Flush out all of the debris with very hot water from the sink, then replace the drain hose, tightening it well at both connection points.

Reset Procedures for the Fisher & Paykel Dishwasher

Press and hold the button decorated with the key and lock image for five seconds.
Press the power button to turn off power to the Fisher & Paykel dishwasher.
Wait a few minutes and then press the power button to restore power.
Turn off and unplug the dishwasher if the issue remains.

Secondly, how do you manually drain a DishDrawer? How to Unclog a Fisher & Paykel Dishdrawer Drain

Obtain a copy of the instruction manual for your specific model of Fisher & Paykel dishwasher.
Use the diagrams in the manual to locate the food trap.
Use the diagrams in the manual to locate your dishwasher's drain hose.
Disconnect the drain hose at both connection points.
Look up the pump assembly in the manual.

Also asked, how do you run a diagnostic on a Fisher Paykel dishwasher?

Dishwasher Diagnostics can only be entered in Power Off mode, ie. when there is no display on the LCD or the badge LED's are off. Diagnostics is entered by holding the KEYLOCK and START/PAUSE buttons simultaneously for 5 seconds. Ensure that KEYLOCK is pushed first.

How do you clean a DishDrawer?

Clean your Fisher & Paykel DishDrawer by taking a bowl filled with a couple cups of white vinegar and placing it in the middle of your DishDrawer. Run it through a normal cycle without any detergent, so the vinegar gets dispersed throughout, leaving your dishwasher smelling and looking like new.